110V 220V OLED Digital Soldering Iron Station & T12 Handle Finished Controller

Description

110V 220V OLED Digital Soldering Iron Station & T12 Handle Finished Controller
Please read the description before order!
Special note: soldering station, the default is not grounded, such as the need to ground on their own.
(Handle to the machine on the line is connected,
need
the five-
core and ground wire on the line. T12 + and sleep
the middle of the two pins)
New solder iron T12 tip need to set the temperature to below 250 for tin protection
By default, we will send the T12-K, if you need to replace T12-K with other tips, please tell us,
you can also purchase
more tips from the picture below.
Parameter
host size: 120* 80*38mm / 4.72 * 3.15 * 1.50 inch
board size: about 68 * 30 * 33mm /2.68 * 1.18 * 1.30 inch,
Includes encoder and buzzer height
display size: 1.3 inch OLED
power voltage: AC 100-240V
powe plug: US / EU plug
heating core support: T12,1321,1322,1323, 2-wire 907 heating core
temperature range: 150℃~465℃ (recommended range of 300℃ to 380℃ )
sleep time: 1 to 255 minutes (recommended range of 5 to 20 minutes)
sleep temperature: 100℃ to 445℃ (recommended range of 100℃ to 200℃)
ncoder step range
: 1 to 99 (recommended range from 1 to 10)
language: English /
Russian
/
Korean
Calibration parameter
: 0.1 to 2.55 (
The smaller the value, the higher the temperature, and the
higher the value, the lower the temperature. Generally, the calibration is between 0.6 and 1.0
)
shutdown time: 1 to 255 minutes (recommended range of 5 to 20 minutes)
date display: YES
clock display: YES
buzzer switch: YES
Low-voltage protection:
Mainly for battery protection settings, can be freely set
Automatic temperature compensation:
The soldering station will strengthen the solder joint
temperature for rapid soldering at large solder joints
Room temperature detection
:
Detect room temperature, so that the temperature is
accurate and the welding temperature is good
Package Included:
1 * 1.3" OLED digital Soldering Iron Station Finished Controller (EU or US plug power cable for choose)
Terms and Conditions :
Shipping
Shipping to most other countries takes about 15-40 days via Standard Int'l Airmail with tracking number#. In rare case, it can take up to 40 days.
It depends on your location and local postal service(e.g.,
Brazil, Mexico
Postal service is slow),
as well as the weather condition along the shipping.
Please verify your primary shipping address. We are not responsible for any wrong or undeliverable addresses
.
Note:
The "Standard shipping..." and "standard SpeedPAK" are come with tracking number, it will takes about 15-45 days,
Some countries
farther away from China may need more time
, such as Mexico , South Africa......
The "Expedited shipping..." , it is using DHL EXPRESS , it will takes about 3-7 days
Payment
We accept payment via Paypal.
The buyer is responsible for any applicable import duties and local taxes.
Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.
Contact Us
We take full responsibility if you receive wrong item or damaged item or item not as describled.
If you're not satisfied for any reason, please feel free to contact us. Just send us an message or email.
You can always get our solution pretty soon in our working time.
Your satisfaction is guaranteed.
About UG
Thank you for choose UG.
As a manufacturer of electronic module, UG have been in business more than 20 years, and therefor have wide experience in all the line we handle.
OEM Service Also Welcome!