-40%
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140
HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140

HIGH PURITY ALUMINA DISK SETTER CRUCIBLE COVER SUBSTRATE 1.480” x 0.100” No.:140

$ 5.28

Availability: 250 in stock
  • Condition: In Excellent New Old Stock Condition
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • Model: N/A
  • Brand: AdvanCer HPM AMPS
  • Country/Region of Manufacture: United States
  • MPN: N/A

    Description

    HIGH PURITY ALUMINA
    CERAMIC DISK PLATE SETTER CRUCIBLE COVER
    No.: 140
    You are buying one of a Small Round High Purity Alumina Ceramic Disk Plate Setter Crucible cover in mint condition being NOS (New Old Stock).  Th
    ese are made from 99.8% high purity Aluminum Oxide (Al2O3) which of course is Alumina. Generally the balance of composition for this purity Alumina material is of Silicon Dioxide (SiO2) which is Silica.
    This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. They may be used for a variety of electrical, mechanical, and thermal applications. They may be used as stand offs for firing parts in a kiln. They may also be used for jewelry or for applications requiring high wear or abrasion resistance. Your imagination is the only limiting factor in the spectrum of possible applications for this component. Be sure to view all photos as they are an integral component of the item description.
    The specifications for these components are as follows:
    Diameter:
    Approximately 1.480"+/-0.005" (37.58mm)
    Thickness:
    Approximately 0.100” (2.5 mm)
    Please Note:
    There are visually discernible differences in any or all of the dimensions. These are precision technical ceramic components. Some may exhibit minor edge chips. There is no warp or camber Specification for this item. However they are relatively flat.
    Specific Gravity or Density:
    3.96 g/cm3
    Water Absorption or Porosity:
    0%
    Fusion Temperature or Melting Temperature:
    2030 °C or 3686 °F
    Maximum Working Temperature:
    1800°C or 3272 °F
    Thermal Conductivity:
    25 W/m* K
    Specific Heat:
    0.9 J/g*K
    Expansion Coefficient or CTE:
    7.5 x 10 E -6 inches/°C
    Electrical Resistivity at 20 C:
    10 E +14 Ohm*cm
    Electrical resistance at 600 C:
    10 E +8 Ohm*cm
    Modulus of Elasticity:
    44 x 10 E +6 p.s.i. or 350 GPa.
    These components were not specifically manufactured for an individual application; therefore be sure to check the dimensional descriptions carefully for your application. Future returns or requests for refunds, because of some "fit" issue or the like will not be honored. Please check the other Alumina component variants that are available in my listings for the size or model that best fits your requirement.
    Your imagination is the only limiting factor in the spectrum of possible applications for these components and materials.
    If you require additional technical information, design, or application engineering consultation, feel free to contact us. As a materials scientist with four decades experience in high temperature processing, ceramics, dentistry, and jewelry manufacture it will be possible to provide you with creative and imaginative approaches to your requirements.
    Feel free to ask any questions you may have regarding this item early. Use PayPal only.
    Combined shipping discount is provided for multiple item purchases. For best results, please be sure to shop using cart, then complete the paying transaction when you are satisfied that all the items you need are in the cart. Items purchased separately will be shipped separately as a unique transaction.
    Please complete payment transactions within 3 days. Items are generally shipped via USPS first class mail with delivery confirmation.
    Ask about shipping costs to your country.
    Feedback is provided for all buyers. We will appreciate yours as well.
    We strive to maintain excellent customer service; and are able to solve virtually any issues you may have. Every effort to provide the most accurate information about this item and every appropriate precaution in packaging this item is made, to assure that your highest expectations and satisfaction are met, and are exercised to meet this requirement for excellence. In winning this auction or purchasing this item you are agreeing that you will first provide the seller every opportunity to provide redress or resolution to any issues you many have concerning this item, prior to leaving any negative feedback about the seller or the item.
    No.: 140