Hill-Rom CareAssist Hospital Bed - Refurbished

Description

Hill-Rom CareAssist Hospital Bed - Refurbished
The controls for the CareAssist Bed are designed to support the ease and comfort of both caregiver and patient. Bed controls are hydraulically operated and are easy to use, and patient controls snap directly into the bed rail for easy access.
This bed is designed to be moved safely and easily. The raised headboard allows caregivers to stay in an upright position while they push the bed. Stopping is easy and secure with the four casters locking in two different directions and a single press to the CareAssist brake system. Alert will sound if brakes are released and bed is still plugged in.
When transporting a patient, this bed can operate without being plugged in using the standard back-up feature.
Note:
Hill-Rom AccuMax Pad pictured above not included. Hospital bed wand/remote not included nor is required for operation.
Features:
One-button Dining Chair position for patient comfort and safety.
Shearless Pivot mechanism with auto contour means less need for caregivers to reposition patients.
Point-of-Care controls save caregiver steps.
"Instant CPR" release lever includes a dampened descent, gently lowering the patient and reducing caregiver back strain.
Patient pendant is stow-able in any side rail.
Higher headboard makes moving bed easier.
Easy-to-read Line-of-Sight angle indicators for degree of head section and Trendelenburg and reverse Trendelenburg.
Four dual-locking casters keep the bed in place.
Built-in bed extender.
Bed and mattress are designed to addresses main entrapment areas.
Durable Bed Exit System (optional) minimizes false alarms. It is designed to be a reminder to the patient to stay in bed.
Scale System (optional):
Has an accuracy of 1% and an operating range of 0 to 400 lbs (0 to 181 kg). The scale display and controls are located on the head end siderails.
Specifications:
Frame Width: 39.74" (100.95 cm).
Frame Length with Head and Foot Board:
Normal: 90.04" (228.71 cm).
Extended: 94.04" (238.86 cm).
Sleep Surface:
Width: 36" (91.44 cm).
Normal Length: 80" (203.2 cm).
Extended Length: 84" (213.36 cm)
Bed Clearance (Under Frame): 5" (12.7 cm).
Low Position (Floor to Deck): 15.75" (40 cm).
High Position (Floor to Deck): 32.24" (81.9 cm).
Head Elevation: 68° (Maximum).
Trendelenburg and Reverse Trendelenburg: 16° (Maximum).
Caster Size: 6" (15 cm).
Bed Weight: 420 lbs (approximately - without surface).
Weight Limit (Safe Working Load): 400 lbs (181.4 kg).
Other options avaiable,
call us for more information (833-238-4633)
Configurations
PPatient Controls
Patient Controls and Scale System
Patient Controls and Bed Exit System
Patient Controls, Bed Exit System,  and Scale System
Patient/Entertainment Controls and Bed Exit System (Hospital Use only)
Patient/Entertainment Controls and Bed Exit, and Scale System (Hospital Use only)
Brochure
User Manual
How to make a damage claim?
Products or parts damaged in shipping are typically replaced depending on the condition and the damage. Our packing stage has improved over the years to virtually avoid all possibility of damage. In the event that the product you received was damaged you may make a claim by contacting customer service at
(833-238-4633)
or by emailing us at
[email protected].
We will then contact you to determine how we can provide a solution to the damaged product.
How to make a warranty claim?
In the event that a warranty claim is needed, customers are asked to call
(
8
33-238-4633)
or email us at
[email protected]
regarding their claim. We will then try to troubleshoot directly with you to resolve the issue. If we are unable to assist by providing a solution from our facility, we will contact a technician in your area to meet at your office to diagnose and repair the product.
Listing and template services provided by inkFrog