Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong

Description

Store category
Sign Up Now !
You may also like
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Product Description
Pro'sKit SS-331H LCD Electric Desoldering Gun Anti-static High Power Strong.
Describe:
Pro'sKit made a comprehensive upgrade for the explosive product SS-331H. After upgrading, the function and performance of the product were effectively improved.
The effect is doubled, and the automatic sleep function is added to effectively improve the service life.
Model No:SS-331H
Voltage: 220 V-240 V~ 50 Hz
Soldering Power: 90 W
Power Consumption: 140 W
Temperature:160 deg C ~ 480 deg C
Vacuum Pressure:>600 mm Hg
Heating Element:Ceramic Heater
Description
SS-331H LCD desoldering station is efficient desoldering tool with a built-in vacuum for through-hole boards and components. It is a thermostatically controlled desoldering station that provides low cost and high performance. Ergonomically friendly structure allows one hand operation, only takes a few seconds per pin, more safe, efficient and comfortable.
Features
- High power desoldering tool with vacuum
- Efficient operation, quick and easy
- Microprocessor Controlled, provides accurate temperature control from 160 to 480°C
- Ceramic heater, provides fast heat up, fast recovery and high insulation resistance
- Designed with a quality heating element, it provides higher performance and longer lifetime than traditional type
- Built-in high power 600mmHg air pump, particularly for lead-free desoldering of multilayer boards
- Large LCD display
- Quick and easy to set the desired temperature and check the actual temperature.
- Fahrenheit or Celsius unit selection.
Specification
Type: Electric Desoldering Gun
Model:SS-331H
Voltage:220V 50Hz （NOT support 110V）
Soldering Power:90W
Power Consumption:140W
Temperature:160°C ~ 480°C
Vacuum Pressure:>600mm Hg
Heating Element:Ceramic Heater
Size: 172*135*190mm
Weight: 2.0kg
SS-331H Correct Use
1.After each work, it is recommended to suction 3-5 times and empty the residual tin in the tube;
2.If the interval between use is about 20 minutes, it is recommended to clean the steel pipe with a needle after air suction;
3.It is found that the suction is reduced during use, please clean the steel pipe with a needle;
4.If the frequency of use is very low, it is recommended to adjust the tin gun to about 200 degrees, and then to the working temperature when using;
5.When the tin slag in the tin storage cylinder is about 1/2, it should be cleaned in time. When the filter cotton is found to be hardened, it needs to be replaced in time.
USE Notice:
1.After Each Use. It is Recommended to take 3-5 times of Empty Suction to Full Clear the residual Tin in The Tube.
2.If the interval is about 20 minutes, it is recommended to use a needle to clean the steel pipe after empty suction.
3.During the use, If the suction is reduced. Please use a needle to clean the steel pipe.
4.If you do not use often, it is recommended to adjust the tin gun to about 200 degrees, and then adjust to the working temperature when using it
5.When there is about 1/2 of the tin slag in tin storage. It should be cleaned in time. When the filter Spong is hardness,Pls replaced in time.
6.The Reason For Block Desoldering Gun
1)The temperature is set too low for long time desoldering,  The solder Tin does not reach the storage tube,But the  temperature comes down.So they  Stayed in the  tube,Make    it  Block
2)Did not clean in time when too much tin slag in the tin storage tube , This will effect the Gun's suction , In  this case , you should remove tail's tin slag . it can be removed only after you use the soldering iron to heat the tin until it melt
Payment
Shipping
Return policy
Contact us & Warranty
Working time
Payment
We accept PayPal only.
Payment must be received
within 7 business days
of auction closing.
We
ship to PayPal's address
only. Please make sure your address in EBAY can match with your shipping address on PayPal.
All major credit cards are accepted through secure payment processor PayPal.
TOTAL AMOUNT DUE includes the final auction price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Shipping
1. Item processing time. We will ship the products within 1-5 working days upon the confirmation of your cleared payment, when buyers have some special request (e.g.Voltage, color...etc.), we may delay to ship the orders and will inform buyers about it. Do please check your message box in 1-2 days after payment is cleared. Otherwise
order may be cancelled due to insufficient of your information.
2.Shipping methods. Items are shipped out via SpeedPAK or E-packet or any other shipping method that can fit your country, we will choose the reasonable
way for you.
3. Delivery time may vary with countries and international shipping for some countries may be much slower than expected. Also your local custom may delay the shipping a lot due to the custom duty they want to charged from you for importing this item from other countries.
Note: Any Import or export duties and the cost of dispatching for remote areas, will be borne by the buyer, because it is difficult to know all country's custom duty or remote area before shipping the item.
4. Please Note
buyers from some of the countries may need to contact us
before making payment.You may be requested to pay extra shipping cost charged by shipping company otherwise order may be cancelled automatically due to insufficient payment for shipping. We need to revise your invoice before your payment please...
Return policy
(1) Taking photos and sending it via eBay Message Box.
Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box.
(2) How we will react? We will investigate the case and may send you the missing item or replacement or refund upon the situation of the case. (sometimes you may be requested to return the incorrect item).Or if it is not seller's error, buyer may need to cover the returning cost.
(3) Valid time for returning. Please contact us within 7 days upon receiving the package.All items must be returned within 30 days of purchasing the item.
Contact us & Warranty
Warranty: 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. Please contact us if you are wondering about how the warranty works for your item.
Contact: Do please contact us before leaving any negative feedback or Opening any kind of case. We promise to achieve your 100% satisfaction. But negative feedback actually can not solve any problem. Thank you so much for your kindness and understanding.
Working time
Beijing time :AM 8:00 -PM 8: 00